..T A Autos Mobile Mechanic..
..T A Autos Mobile Mechanic..

NOW ABLE TO CARRY OUT AIR CON SERVICING AND DIAGNOSTICS

GALLERY

 Our gallery provides you with a glimpse of what we offer and some of the cars that we have worked on, some old and some new, most makes of cars are worked on and most jobs are under taken from a set of front brake pads to a complete engine strip and rebuild.

 

opening hours

 

monday           08.00 to 18.00

Tuesday          08.00 to 18.00

Wednesday     08.00 to 18.00

Thursday         08.00 to 18.00

Friday              08.00 to 18.00

saturday         closed

 

CLOSED SUNDAYS AND BANK HOLIDAYS

 

07880 687 076

 

 

 

 

Preventive Maintenance:

  • Change the fluid in your transmission at recommended intervals.  Your owners manual will give you a time schedule in miles and or months.  If you tow a boat or trailer be prepared to change the fluid even sooner.  Most owners manuals will give you recommend intervals for severe use like towing or off-road use.
  • Do not "ride" the clutch if you have a manual transmission.  Learn to release the clutch in a smooth motion without reving the engine too much.  Reving the engine too much while pulling out can cause premature wear on the clutch.
  • If you do tow a boat or trailer, consider getting a transmission cooler for your automatic transmission.  Temperatures can approach the boiling point in severe conditions.  Most newer trucks come equipped with transmission coolers if sold with a towing package.
  • Make sure your universal joints are lubricated at oil changes if they are the type which can be lubricated.  When replacing universal joints try to find replacements with lubrication fittings so you can lubricate in the future.
  • If you have a front wheel drive car, avoid applying the gas to the floor while the wheels are turned at full lock.  This puts stress on the universals and can cause premature failure.  This can happen when stuck in the snow and trying to get out.

What to discuss with your mechanic:

  • If you are noticing a vibration in the car while driving, make sure to describe when it happens.  While accelerating?; braking?; Maintaining speed?; When turning?

If you have any other questions feel free to contact us.

  • Exhaust manifold:  The exhaust manifold attaches to the cylinder head and takes each cylinders exhaust and combines it into one pipe.  The manifold can be made of steel, aluminum, stainless steel, or more commonly cast iron.  
  • Oxygen sensor: All modern fuel injected cars utilize an oxygen sensor to measure how much oxygen is present in the exhaust.  From this the computer can add or subtract fuel to obtain the correct mixture for maximum fuel economy.  The oxygen sensor is mounted in the exhaust manifold or close to it in the exhaust pipe.
  • Catalytic converter:  This muffler like part converts harmful carbon monoxide and hydrocarbons to water vapor and carbon dioxide.  Some converters also reduce harmful nitrogen oxides.  The converter is mounted between the exhaust manifold and the muffler.
  • Muffler:  The muffler (silencer) serves to quiet the exhaust down to acceptable levels.  Remember that the combustion process is a series of explosions that create alot of noise.  Most mufflers (silencers) use baffles to bounce the exhaust around dissipating the energy and quieting the noise.  Some mufflers also use fiberglass packing which absorbs the sound energy as the gases flow through.
  • Exhaust pipe:  Between all of the above mention parts is the exhaust pipe which carries the gas through it's journey out your tail pipe.  Exhaust tubing is usually made of steel but can be stainless steel (which lasts longer due to it's corrosion resistance) or aluminized steel tubing.  Aluminized steel has better corrosion resistance than plain steel but not better than  stainless steel.  It is however cheaper than stainless steel.

 

Print Print | Sitemap Recommend this page Recommend this page
© T A Autos

This website was created using 1&1 MyWebsite.